Shriya Polyurethane PUF Support "SHRIYA" offers a wide range of PUF Supports. The normal density of PUF support ranges from 80 kg/ m3 to 350 kg/ m3 but higher density PUF supports can be made available against specific customer's requirements. Salient Features: Durable. Available in varied density and dimensions as per customer's requirement. Pre-fabricated and ready to use. Sawing and shaping not required. Water Resistant no wet or dry rot. Fire retardant, hence safer. Construction Friendly. PUF Pipe Support Pipe Saddle Shiplap Block PROPERTIES ADVANTAGES Wide Density Range Higher densities enable higher loads without increase in surface area. Factory Pre-Engineered Sawing and shaping at site not required. The support matches pipe's OD precisely. Drastic reduction of installation time. Closed Cell Structure Closed cell structure does not permit water penetration. No dry and wet rot. Excellent 'K' value Provides much superior insulation as compared to timber and other materials. No condensation at support point. So no drips, puddles or energy wastage Good Fire Resistance Better Safety at site. Durable compared to other materials. Closed Dimensional Tolerances Pipe Support thickness is in perfect alignment with insulation Thickness, resulting in smooth finish at support location. Supplied in assembled condition, Completed with all metal Attachments Faster installations. Joint-free in the load bearing area, even for larger diameters of pipe. Special sizes, Shapes and Finishes O n customer requirement, non standard sizes & shapes can be manufacturers to suit specifications. Supports can be supplied with a factory- applied coat of fir-resistive mastic, which also serve as vapour barrier, on the exposed surface. 1. Standard Kraft Paper 2. Aluminum foil 3. Bituminised Paper Insulating elements with flexible outer layers such as paper and aluminium foil are used especially for the thermal insulation of various applications such as: SHRIYA PUF- can be used for Cold Room, Hot Room, A/C Room, Roofing, Pipe line, Inside Partitions and where temperature maintenance is required. SHRIYA PUF- will reduce a reasonable percentage of electric consumption. It has good capacity to maintain the require temperature wherever required. It is easy to handle and available in 10mm to 200mm thickness, with the density of 36-150 kg/m.